This 10-Pack Bundle includes the following webinars:
Part 1: MIL-STD-461G, General Requirements
MIL-STD-461G incorporated many changes into the general requirements from changes in calibrations and configuring the test item to adding test equipment allowed. This class of the MIL-STD-461 subject series provides an overview with the new details and rationale for the changes. A necessary introduction that supports all the individual test methods of the subject classes.
Part 2: MIL-STD-461G, CE101, CE102
Conducted emission measurements are well defined but a thorough review of this class provides the basics on controlling data collection and presenting the measurements. Conducted emission measurements are applicable to all services and installations and the method supports variation in instrumentation that includes test parameter adjustments presented in this class.
Part 3: MIL-STD-461G, CE106, RE103
Antenna port emissions apply to many devices in this age of wireless technology used by a large variety of devices. This class discusses not only the measurements but provides guidance on managing the test configuration to prevent damage or saturation by transmitting signals. These tests call for conducted (CE106) testing with radiated (RE103) as the alternative where conducted measurements are hindered. If wireless is part of your product, this class is critical to preparing and executing the applicable tests.
Part 4: MIL-STD-461G, RE101, RE102
Radiated emissions are applicable to all services and installations as the fundamental means of identifying interference producers. A few changes in revision “G” are identified along with the instruction on performing these tests and analyzing the data for potential measurement errors. These tests are frequently accomplished early to find risk areas that are solved early by the notion of “what goes out may come in” so potential susceptibility issues are often mitigated.
Part 5: MIL-STD-461G, CS101
CS101 – the first class of the susceptibility group introducing the concept of managing two test control levels while monitoring the test article performance. Keeping up with all the parameters and test item monitoring tasks the focus of the test engineer so this discussion helps with how to take care of the total test. This test appears very straight-forward but is frequently laden with test errors – an essential class for understanding the susceptibility testing.
Part 6: MIL-STD-461G, CS114, CS115, CS116
CS114 is likely the most error prone test because the complexity of two test control levels mixes with RF parameters that are greatly affected by parasitic elements of the configuration. CS115 and CS116 are similar in the approach but with transients being the culprit so this is integrated into the class. The test method details are presented with information on what is happening within the configuration that must be understood to be properly managed for test integrity.
Part 7: MIL-STD-461G, CS117, CS118
These tests were introduced in revision “G” to deal with induced lightning and electrostatic discharge events. These tests have many details associated with test parameters and calibration of the test levels and waveform control.
Part 8: MIL-STD-461G, RS101, RS103
Radiated susceptibility tests that represent the testing with the largest time in the overall test program. RS103 is applicable to all services and installations so understanding is essential. Many test items include wireless technology, understanding how to manage vulnerability from radiated interference with intentional reception is a crucial part of this class.
Part 9: MIL-STD-461G, CS103, CS104, CS105, CS109, RS105
This class provides an overview of the other test methods of MIL-STD-461. The group of tests have specific applicability and as such are infrequently specified – but when specified the test personnel need to understand the concepts to support preparation of the detailed test procedure. This class provides for that concept introduction.
Part 10: MIL-STD-461G, Documentation/DIDs From test planning to reporting and analysis of information for system level integration, the documentation review guides to meeting the data item description details. Throughout the test and evaluation program, well prepared documents provide guidance and critical details for acceptance of the results. Questions should be answered before being asked is a goal that is seldom achieved. Discussion on this portion of the test program is geard to support that goal.
MIL-STD-461G: CE101-CE102 [2017 Webinar Recording]
Video Length: 45 minutes. MIL-STD-461G, CE101, CE102
MIL-STD-461G: General Requirements [2017 Webinar Recording]
Video Length: 55 minutes. MIL-STD-461G, General Requirements
MIL-STD-461G: CE106, RE103 [2017 Webinar Recording]
Video Length: 45 minutes. MIL-STD-461G, CE106, RE103
MIL-STD-461G: RE101, RE102 [2017 Webinar Recording]
Video Length: 50 minutes. MIL-STD-461G, RE101, RE102
MIL-STD-461G: CS101 [2017 Webinar Recording]
Video Length: 45 minutes. MIL-STD-461G, CS101
MIL-STD-461G, CS114, CS115, CS116 [2017 Webinar Recording]
Video Length: 55 minutes. MIL-STD-461G, CS114, CS115, CS116
MIL-STD-461G: CS117, CS118 [2017 Webinar Recording]
Video Length: 40 minutes. MIL-STD-461G, CS117, CS118
MIL-STD-461G, RS101, RS103 [2017 Webinar Recording]
Video Length: 55 minutes. MIL-STD-461G, RS101, RS103
MIL-STD-461G: CS103, CS104, CS105, CS109, RS105 [2017 Webinar Recording]
Video Length: 50 minutes. MIL-STD-461G, CS103, CS104, CS105, CS109, RS105
MIL-STD-461G, Documentation/DIDs [2017 Webinar Recording]
Video Length: 55 minutes. MIL-STD-461G, Documentation/DIDs